The Waste Bin Tag UHF is specifically designed for Waste Management applications, where it allows the tagging of plastic bins, with a form factor being compliant to DIN30745. The tag is resistant against environmental influences like water, chemical, and shock.

It fits into the standard tag nests of most plastic bins. While other bin tags usually operate in the low frequency area, the iDTRONIC Waste Bin Tag UHF offers a reading range of 2 m. With this outstanding reading range the Waste Bin Tag UHF fulfills the strong requirements in Waste Management.

Thanks to the integrated 512 bit memory, this ISO18000-6C compliant tag allows the reading and writing of customer specific data.

Key features:

• UHF TAG FOR WASTE MANAGEMENT
• Optimized for standard plastic bins
• Designed to fit into the tag nest of most plastic bins
• Water and shock resistance
• High chemical resistance
• Significant higher read-range and memory capacity than LF/HF tags
• Compliant to UHF standards EPC Class 1 Gen 2 and ISO18000-6C
• Up to 2 m reading range

For further information about the new Waste Bin Tag UHF and updated news about all iDTRONIC products please go to http://idtronic-rfid.com/ or write us an e-mail: info@idtronic.de

We’re looking forward to provide you with professional advice!

The Mobile Terminal M3 was designed for industrial use and is of outstanding durability. It proved unmatched ruggedness to perform in extreme environments through a large variety of durability tests.

With its combination of a powerful Intel X-scale PXA270 624 / 806 MHz processor and the user friendly Windows Mobile 6.5 operating system, the M3 Orange allows running many different applications, not least because of the up to 256 MB SDRAM and 1024 MB Flash memory.

The new Mobile Terminal M3 Orange is equipped with an advanced UHF Long-Range RFID module. This powerful module offers a reading range of up to 1 m in combination with a long battery life time. The M3 Orange UHF Long-Range is available with modules for all common global frequencies (865-960 MHz). Especially the working flow of applications like maintenance and asset tracking can be improved with iDTRONIC’s Mobile Terminal M3 Orange.

This exclusive and competitive combination is only available through iDTRONIC and our distribution partners. To go without saying, the M3 Orange is still available with a HF RFID module as well.

Additionally to this new hardware, iDTRONIC offers a wide variety of accessories and service contracts which can be individually modified to the customers demand.

For further information and updated news about all iDTRONIC products please go to http://idtronic-rfid.com or write us an e-mail: info@idtronic.de

In this case, the modern RFID technology allows a rapid and steady registration of passing vehicles over a distance of several meters. The new and very thin Windshield Tag UHF is simply stuck on the pane, whether inside or outside — the functionality stays the same. The tag is weather-proof, UV resistant and equipped with a theft protection, ensuring the designated usage (Maximum safety: chip destroyed when removing tag).

In addition, the functionality of the new tag can be expanded. In combination with the RFID technology, barcode and 4c logo print as well as the integration of further safety features is smoothly realizable: The Windshield Tag UHF can be designed so that it perfectly fits to your application.

Applications

• Access control to carparks
• Automatic toll systems
• Production and logistics

The dimensions of the new iDTRONIC Windshield Tag UHF are 105 × 35 × 0.2 mm and it consists of 2 layers polyester. It stands temperatures of up to +150 °C.

For further information and updated news about all iDTRONIC products please go to http://idtronic-rfid.com/ or write us an e-mail: info@idtronic.de

iDTRONIC, your trusted supplier for professional RFID hardware, introduces its new and improved, in-house developed SOFTWARE DEVELOPMENT KIT (SDK) for reading and writing all ISO 18000-6C tags (incl. Class1 Gen2). Thanks to its approved programming, the new SDK by iDTRONIC is very clearly laid out because it is limited to the most important and necessary functionalities – no frills!

Some very new highlights: The new iDTRONIC SDK supports a wide range of programming languages (e.g. Visual C++, Visual Basic, C#) and further the functionality of all provided SDK for iDTRONIC products has been standardized, whether you use it with a M3 Mobile Terminal or a Desktop Reader EVO.

It’s understood that the new SDK is supplied with every newly ordered iDTRONIC Desktop Reader EVO and Mobile Terminal M3 Orange.

For further information about all iDTRONIC products please visit http://idtronic-smartrfid.com/

The new Keyfob BLADE is exclusively available by iDTRONIC and can be supplied in 5 different colors. The Keyfob will be delivered with a glossy ABS housing, which is fixed with a robust metal frame.

Applications

• Access Control
• Time Attendance
• Fitness Center, Gym, Spa, …

Personalization Options

• Chip Encoding
• Thermo Print – Chip UID Number
• Thermo Print – Consecutive Serial number
• Laser engraved – Chip UID Number
• Laser engraved – Consecutive Serial number

• Available Colors: Blue / Black / White / Grey / Red

Overview of all available iDTRONIC Keyfobs

Keyfob ECO	Keyfob BASIC	Keyfob DROP
Keyfob EASY	Keyfob EVO	Keyfob EPOXY
Keyfob SAIL	Keyfob NATURE	Keyfob SOFT

As a leading manufacturer and supplier of innovative and professional RFID hardware, we are happy to invite you to our booth A27.

iDTRONIC’s innovative products are available for all common RFID standards such as LF 125 kHz, HF 13.56 MHz and UHF 868 MHz.

The entire product portfolio is perfectly fitted for the needs of System Integrators in the fields of application like Auto ID, Logistics, Industrial Automation and Asset Tracking.

Gladly iDTRONIC-Team introduces its core competences and product innovations more detailed:

• Entire RFID-Portfolio for System Integrators and Developers
• BLUEBOX Gen2-RFID Controller, Readers and Antennas
• Mobile Data Terminals with integrated iDTRONIC RFID Technology
• Special RFID-Tags for Auto-ID, Logistik and industrale Applications
• M3 Mobile Data Terminals

We offer information without hectic pace and pressure of time. Our qualified team presents all of our innovations to you and gladly informs you individually.

Optionally you can ensure your free customer ticket for euro ID 2012 in Berlin. Just write us a short e-mail (sales@idtronic.de) considering there’s only a small number of tickets available.

We’re looking forward to your visit. For further information about all iDTRONIC products go to www.idtronic-group.com

First of all we’d like to thank you for visiting us at CeBIT 2012 in Hannover.

Further we’d like to take the chance to show you some photos of our this year’s CeBIT booth. We were fully satisfied with the fair, but also very pleased by your interest in our new and innvotive producs, e.g. the mobile terminal “M3 Orange UHF” or the next generation of the BLUEBOX familiy. We’d like to mention, that we will attend further fairs this year and are looking forward to seeing you again.

Please find some impressions of our appearance at the fair below.

We are already looking forward to next year’s CeBIT fair.

The BLUEBOX Professional RFID product highlights are

• Available for UHF, HF, and LF RFID integration
• Solutions for Short-, Mid-, and Long-Range applications
• Controllers for running 1, 2, and 4 antennas
• Multiple interface options
• Ruggedized product designs and housings
• Unique SDK for all BLUEBOX products
• Made in Germany

The latest generation of BLUEBOX Professional RFID products features additional enhancements, which are

• Faster processing thanks to improved ARM processor
• Internal backup memory
• M12 connections for trouble-free and secure mounting
• Profinet and Ethernet/IP interfaces available
• Extended range of application specific antennas
• Improved SDK with demo applications

Also available as a Start-Up-Kit “BLUEBOX Basic” as well as a desktop version “BLUEBOX desktop”

They can be used like a wrist watch and make the usage of RFID technology easy. Beside their robustness iDTRONIC RFID wristbands have a sealed electronic unit and are waterproof.

The special innovation of the Wristband FLEX is the new improved soft PVC housing with PVC inlay.

The Wristband FLEX is a very high quality and good looking Wristband. It is very nice to wear and a very good choice for Health Clubs and Leisure Areas.

Personalization options of the iDTRONIC Wristband FLEX

• 2 colour offset printing with your design or logo
• Engraving of UID number or Serial number
• Chip Encoding

Highlights of the iDTRONIC Wristband FLEX

• Practical soft PVC material housing
• Waterproof
• Available in various colors
• Various personalization options
• Innovative PVC Inlay
• Available with all common LF & HF ICs

In-Metal Tags UHF and On-Metal Tags UHF

The new iDTRONIC In-Metal tags UHF and On-Metal tags UHF come in rugged IP68 housings. They have been designed for very harsh environments and can be used in a large number of applications such as Asset Tracking, Industrial Automation and Supply Chain. With up to four meter reading distance and a very large application temperature range, the tags can deliver significant value in your application.

Key Features and Benefits of The New On-Metal Tags UHF

• Performs On-metal with read range of up to 6 meters
• IP68 rated to handle high application temperatures up to +250 °C
• Large user memory (up to 32 kBytes)
• Available dimensions:
      » OM2:   18 × 11 × 5 mm
      » OM3:   32 × 13 × 5 mm
      » OM4: 100 × 26 × 9 mm

==> Click here to see datasheet

Key Features and Benefits of The New In-Metal Tags UHF

• Performs In-metal with read range of up to 4 meters
• Ceramic Material to handle embeddable in In-Metal applications
• High application temperatures up to +150 °C
• Large user memory (up to 32 kBytes)
• Available dimensions:
      » IM2:   12 × 7 × 3 mm
      » IM3:   25 × 9 × 3 mm
      » IM4:   30 × 30 × 3 mm

==> Click here to see datasheet

High-Temperature tag UHF

The iDTRONIC High-Temperature tag UHF tag has been specifically designed to perform under extreme heat and repeated exposure to caustic fluids for applications such as autoclaves, hot water wash cycles and post-paint processes. The iDTRONIC High-Temperature tag UHF is constructed with IP68 rating for high reliability and durability in all types of environments. The tag survives applications with temperatures of up to 250 °C and other harsh elements such as high impact and caustic chemicals. The design of the iDTRONIC High-Temperature tag UHF has been done as well for the use on metal objects / structures.

Key features and benefits of the new High-Temperature Transponder

• On-metal tags with read range of up to 6 meters
• IP68 rated rated to handle high application temperatures
• +250 °C application temperature for up to 4 hours
• Large user memory (up to 32 kBytes)
• Small form factor with 51 × 37 × 8 mm

==> Click here to see datasheet

Tool Tags UHF

The iDTRONIC UHF tool tags UHF have been designed especially for healthcare and tool tracking applications. In healthcare, the compliance with FDA requirements for Unique Device Identification enables the costumer to track automatically all surgical tools and reduce the risks of foreign object debris (FOD) and infection control. The tool tags can be mounted on metal or embedded in metal and will withstand repeated autoclave cycles.

For tool tracking, the tags can mounted on metal or embedded in metal and will withstand repeated chemical washing cycles. The IP68 housing allows a usage in harsh environments similar to construction sides. It enables the costumer to track automatically all tools and reduce risks of product recalls or missing equipment.

With up to 1.5 meters reading distance and their temperature ranges, the transponders can deliver significant value to many applications in health care and industrial environments.

Key features and benefits of the new iDTRONIC Tool Tags UHF

• World’s smallest passive UHF EPC Class 1 Gen 2 tags
• Performs On-metal with read range of up to 1.5 meter & In-Metal with up to 1 meter
• IP68 rated to handle high application temperatures up to +150 °C
• Compliant with FDA requirements
• Withstand repeated autoclave and chemical washing cycles
• Available dimensions:
      » TT2:   12.3 × 3.2 × 2.3 mm
      » TT3:   Ø 6 × 2.5 mm

==> Click here to see datasheet

The iDTRONIC UHF ISO Cards with Alien HIGGS 3 UHF Gen2 chip and can be fitted to the ISO7810 standard produces. Our cards are available through a UHF frequency band from 860-960 MHz and can be used in all over the world. We can of course personalize the cards for you, whether they offset printed cards, serial numbers, bar code or chip encoding required, please contact us for it and we find the right solution for your project. ISO cards come with UHF technology applications in addition to entry/access control and more often at events such as Exhibitions and concerts are used. You want to use your card in several applications on different frequencies? Then you simply take advantage of our Hybrid Cards. iDTRONIC UHF ISO Cards can easily be equipped with an additional RFID chip.

Some Examples

• Alien Higg3 Gen2 + NXP Mifare 1S50
• Alien Higg3 Gen2 + NXP Hitag
• Alien Higg3 Gen2 + NXP I-Code SLI
• Alien Higg3 Gen2 + LEGIC Prime / Advant
• Alien Higg3 Gen2 + EM4200

Other combinations are possible on request!

For detailled information on Hybrid Cards pls. click here.

UHF Labels

All iDTRONIC UHF labels are also using the powerful Alien HIGGS 3 UHF Gen2 chip. iDTRONIC UHF labels are available in 5 standard sizes and different antenna designs. As an overlay, we offer paper and durable PET. Thanks to high quality 3M adhesive films can iDTRONIC UHF labels are attached securely and comfortably. The main applications for UHF labels can be found in the areas of supply chain management and the identification of documents.

For detailled information on Paper Labels pls. click here.

iDTRONICs KEYFOB EVO combines the RFID technology with a complete new customizable Keyfob. Our KEYFOB EVO has a very nice Epoxy finish which gives an exclusive touch to the product and is available with all common 125 kHz & 13.56 MHz ICs.

… go to the product page

Applications

• Access Control
• Time Attendance
• Fitness Centers
• Gyms, Spa & Wellness

Personalisation Options

• Full 4 / 4 C Offset Printing with customer design / logos (for both sides)
• 6 different kind of Forms
• 3 different kind of Keyrings
• Different Hole Positions
• Printing or Laser engraving of Serial Number / UID Number

Available Forms of iDTRONIC’s Keyfob EVO

Keyfob EVO – Pear	Keyfob EVO – Circle
Keyfob EVO – Square	Keyfob EVO – Card
Keyfob EVO – Ellipse	Keyfob EVO – Oval

Available Keyrings for iDTRONIC’s KEYFOB EVO

Keyring EVO Chain	Keyring EVO Ring	Keyring EVO Rubber

Serial Number // UID Number	Various Hole Sizes // Hole Position

… go to the product page

The M3 Orange was designed for industrial use and is of outstanding durability. It proved unmatched ruggedness to perform in extreme environments through a large variety of durability tests.

The combination of a powerful Intel X-scale PXA320 806MHz processors and the user friendly Windows Mobile 6.5 operating system, 256 MB SDRAM and 1 GB Flash memory allow to run many different applications.

RFID Unit HF (13.56 MHz)

The Mobile Terminal M3 is IP65 rated.

As special feature, the M3 Mobile in HF version has also two SAM slots integrated. Thanks to this feature, this device can be used in Public Transport as well as Mobile Payment applications.

The iDTRONIC Mobile RFID Terminal M3 Orange suit perfectly for the following applications:

• Contactless E-Ticket
• Access control
• Cashless payment
• Public transport
• Distribution

The M3 Orange is equipped with a high capacity Lithium ion battery which allows a long operating time. Standard accessories Desktop Cradle, Power Supply, Earphones, Active Sync cable, Spare battery, Spare stylus are part of each delivery Standard communications are Bluetooth, USB, 802.11 b / g Wi-Fi technology. Thanks to a wide range of options/accessories (example: GPS, Camera, Barcode Scanner),it is possible to customize the M3 Orange terminal for your application.

Highlights of the iDTRONIC Mobile RFID Terminal M3 Orange

• Dimensions: 166 × 78.6 × 24.9 mm
• Drop test: 1.50 m (26 drops tested ) Humidity protection: IP65
• Processor/Memory: Intel PXA 320 – 806 MHz, 1 GB Flash ROM, 256 MB RAM
• Operating system: MS Windows Mobile 6.5
• LC Display:
  » 3.5” 240 × 320 Full VGA Transflective TFT with 65k colors
  » Color LCD Touchscreen with white LED Backlight
• Keyboard:
  » 23 alphanumeric keys, backlight , incl. 3 × 4 numeric keypad
  » 1 On / Off button
  » 1 Camera button
  » 1 Scanner button
• Battery/power supply:
  » Lithium-Ion 3.7 V, 3300 mAh rechargeable (Smart Battery)
  » Backup battery 200 mAh
  » Input 100-240 VAC, 50/60 Hz
• Interfaces:
  » 1 × USB
  » 1 × Micro SD-Card slot
  » 1 × 26 Pin Docking Connector for ActivSync
  » Bluetooth
  » WLAN
]]> http://idtronic-group.com/en/news/idtronic-presents-its-rfid-mobile-terminal-m3-orange/feed/ 0 http://idtronic-group.com/en/events/mobility-day-2011/ http://idtronic-group.com/en/events/mobility-day-2011/#comments Wed, 02 Nov 2011 12:24:00 +0000 IDTronic http://idtronic-group.com/?p=1713 iDTRONIC – Mobility Day 2011

Ludwigshafen – 8. Dezember 2011 – 08:30

 

---

In diesem Jahr empfangen wir Sie wieder zum Mobility Day im TechnologieZentrum Ludwigshafen. Erfahren Sie alles über unsere neuesten Technologien und die Welt der RFID Möglichkeiten.

 

---

 

Wir bieten Ihnen viele interessante Informationen rund um die iDTRONIC Group und die Partnerschaft mit iDTRONIC.

 

Diese Themen erwarten Sie:

• M3 MOBILE Datenerfassungsgeräte
  Highlights: M3 Orange UHF?/?M3 White
• PIDION Datenerfassungsgeräte
  Highlight: Pidion 1500
• Anwendungen für mobile Datenerfassungsgeräte
  (Zutrittskontrolle, Logistik, Einzelhandel, ÖPNV, Gesundheitswesen)
• Einsatz und Grenzen der RFID-Technologie
• iDTRONIC RFID-Datenträger

 

---

Termin

Donnerstag, 8 Dezember 2011,
von 08:30 Uhr bis 15:00 Uhr

Ort

TechnologieZentrum Ludwigshafen (TZL)
Donnersbergweg 1
67059 Ludwigshafen

 

Wir freuen uns auf Ihren Besuch.

 

---

Agenda (vorl.)

Von – Bis	Inhalt
08:30 – 09:30	Check-In
09:30 – 09:50	Begrüßung und Vorstellung iDTRONIC?GmbH
09:50 – 10:20	M3 MOBILE Datenerfassungsgeräte Highlights: M3?Orange?UHF?/?M3?White
10:20 – 10:50	Coffee Break + Anfassen + Testen
10:50 – 11:20	PIDION Datenerfassungsgeräte Highlight: Pidion?1500
11.20 – 12.00	Anwendungen für Datenerfassungsgeräte im Bereich Zutrittskontrolle
12:00 – 13:00	Mittagspause + Anfassen + Testen
13:00 – 13:40	Anwendungen für mobile Datenerfassungsgeräte in den Bereichen Logistik, Einzelhandel, ÖPNV und Gesundheitswesen)
13:40 – 14:20	iDTRONIC RFID-Datenträger Einsatz und Grenzen der RFID-Technologie
14:20 – 14:40	Coffee Break + Anfassen + Testen
14:40 – 15:00	Vorstellung Service & Support
Ab 15:00	Gespräche

 

==> Zur Homepage des TechnologieZentrums Ludwigshafen

]]> http://idtronic-group.com/en/events/mobility-day-2011/feed/ 0 http://idtronic-group.com/en/news/idtronic-introduces-the-new-usb-desktop-reader-evo-uhf/ http://idtronic-group.com/en/news/idtronic-introduces-the-new-usb-desktop-reader-evo-uhf/#comments Thu, 20 Oct 2011 11:00:56 +0000 IDTronic http://idtronic-group.com/?p=1647 iDTRONIC´s new USB Desktop Reader EVO UHF is a high performing and economic proposal for the fast growing group of customers using UHF technology

 

iDTRONIC, a leading supplier for RFID hardware, introduces the new USB Desktop Reader EVO UHF for reading and writing all ISO 18000-6C tags (incl. Class1 Gen2). Thanks to its frequency band from 865 — 915 MHz, the USB Desktop Reader EVO UHF can be used for ETSI and FCC applications.

 

iDTRONIC´s USB Desktop Reader EVO UHF is an easy to handle RFID Read/Write unit to be used with USB equipped Terminals and Netbook / Laptop / Tablet-PC or PC. Its light weight and its excellent design, in combination with the latest technology and a robust ABS housing, make it the perfectly suited to a very wide range of identification applications like Encoding, Network Access, Access Control or Logistics.

 

The USB Desktop Reader EVO UHF has a 20 dBm power output. Its linearly polarized built-in antenna allows a maximum reading distance of up to 15 cm (depending on type of transponder). The USB 2.0 ensures reliable, high-speed Data transfer.

 

iDTRONIC´s new USB Desktop Reader EVO UHF is a high performing and economic proposal for the fast growing group of customers using UHF technology.

 

Highlights of the USB Desktop Reader EVO UHF

• Supported transponders:
  » ISO 18000-6C
  » EPC Class 1 Gen 2 Tags
  » NXP UCODE EPC Class 1 Gen2
  » NXP U-Code G2iL
• can be used for Europe ETSI standard USB 2.0 interface
• 20 dBm power output
• full SDK (reader host protocol, DLL, source code) and MS Windows based demo software
• robust ABS housing
• reading distance of up to 15 cm

 

Applications

• Desktop Readers / Encoders
• Network Access Control
• Access Control
• Logistics

 

For more information about the new USB Desktop Reader EVO UHF and all other iDTRONIC RFID products, please visit our website idtronic-smartrfid.com

]]> http://idtronic-group.com/en/news/idtronic-introduces-the-new-usb-desktop-reader-evo-uhf/feed/ 0 http://idtronic-group.com/en/news/nfc-updatethe-mobile-phone-sticker-now-available-from-idtronic/ http://idtronic-group.com/en/news/nfc-updatethe-mobile-phone-sticker-now-available-from-idtronic/#comments Fri, 07 Oct 2011 11:00:55 +0000 IDTronic http://idtronic-group.com/?p=1483 iDTRONIC SMART TAGS, a leading supplier for Smart Tags and Smart Cards offers now the new NFC Mobile Phone Sticker.

 

The iDTRONIC NFC Mobile Phone Sticker is specially designed to work on any mobile phones. With the innovative design in its size, it is thin and flexible which makes it easily to attach to any mobile devices. Besides, the tag is embedded with special material to allow it to work on metal surface environment where it is impossible for normal RFID sticker. It can attach to all model of mobile phones with plastic or metal housing.

 

The iDTRONIC NFC Mobile Phone Sticker is corresponding to the ISO 14443 and ISO 18092 NFC standard, which allow usage in innovative applications like:

 

Applications

• ePayment
• eTicketing
• Loyalty
• Access Control

 

The following versions are available:

 

IC Type	Memory	Standard
NXP Mifare Ultralight	512 bits	ISO 14443 A
NXP Mifare Ultralight C	64 bytes	ISO 14443 A
NXP Mifare MF1S20 NXP Mifare MF1S50 NXP Mifare MF1S70	256 bytes 1024 bytes 4096 bytes	ISO 14443 A (1-3)
NXP Mifare DESFire EV1 (2k) NXP Mifare DESFire EV1 (4k) NXP Mifare DESFire EV1 (8k)	2 kbytes 4 kbytes 8 kbytes	ISO 14443 A (1-4)
NXP SMART MX	40/80 kbytes	ISO 14443 A

 

The iDTRONIC NFC Mobile Phone Sticker can be fully personalized according to your specification with printing, logo, barcode and number.

 

Besides the NFC Mobile Phone Sticker we can also supply Smartcards, Keyfobs and Wristbands with NFC Technology.

]]> http://idtronic-group.com/en/news/nfc-updatethe-mobile-phone-sticker-now-available-from-idtronic/feed/ 0 http://idtronic-group.com/en/news/change-from-nxp-mifare-4-byte-uid-number-to-7-byte-uid-number/ http://idtronic-group.com/en/news/change-from-nxp-mifare-4-byte-uid-number-to-7-byte-uid-number/#comments Tue, 27 Sep 2011 11:00:54 +0000 IDTronic http://idtronic-group.com/?p=1475 Guidance for the change from NXP Mifare
4 byte UID number to 7 byte UID number

The UID of Mifare cards is in most cased used to identify the card during the selection and anti-collision process. It also serves as a logical identifier in contactless systems. Now the NXP Unique 4 Byte IDs will be discontinued for Mifare1S50 (1K) and Mifare1S70 (4K) NXP offers two options for future Mifare card and tags orders:

1.    Mifare 7 Byte UID

2.    Mifare 4 Byte NU (Non-Unique) UID

 

Non-unique IDs need to be considered in the contactless systems as their 7 Byte UID numbers might cause problems in automatic fare collection, closed loop payment and access management applications!

 

iDTRONIC Customers will have the choice to purchase either products with unique 7 Byte ID’s or 4 Byte NU IDs, which are not globally unique any more.

 

New Mifare 7 Byte and 4 Byte NU cards and tags will be available from Q4 2011, until then all orders will be produced with standard Mifare 4 Byte UID.

]]> http://idtronic-group.com/en/news/change-from-nxp-mifare-4-byte-uid-number-to-7-byte-uid-number/feed/ 0 http://idtronic-group.com/en/news/nxp-i-code-sli-xnow-available-from-idtronic/ http://idtronic-group.com/en/news/nxp-i-code-sli-xnow-available-from-idtronic/#comments Tue, 13 Sep 2011 11:00:09 +0000 IDTronic http://idtronic-group.com/?p=1478 iDTRONIC SMART TAGS, a leading supplier for Smart Tags and Smartcards offers now all products also with the new I-Code SLI-X transponder IC from NXP.

 

The I-CODE SLI-X IC is a dedicated device for intelligent Labels, Tags and Smartcards used in applications such as library, access control and product authentication.

 

The new I-CODE SLI-X offers the possibility of operating labels simultaneously in the field of the reader antenna (anti-collision). It is specially designed for long read range applications.

 

The 1024 bit EEPROM memory is divided into 32 blocks. A block is the smallest access unit. Each block consists of 4 bytes (1 block = 32 bits). Bit 0 in each byte represents the least significant bit (LSB) and bit 7 the most significant bit (MSB), respectively.

 

The memory is divided into 2 areas

• Configuration area:
  Within this part of the memory all required information is stored, such as UID, write protection, access control information, passwords, AFI and EAS. This memory area cannot be directly accessed.
• User memory:
  Within the 896 bit memory area the user data are stored. Direct read/write access to this part of the memory is possible depending on the related write protection conditions.

 

Of course you can use this new I-CODE SLI-X IC for all iDTRONIC tag/card formfactors like ISO CARD, RFID KEYFOBS or RFID WRISTBANDS.

 

The I-CODE SLI-X IC is definitely a valid choice if security and price are the driving factors.

]]> http://idtronic-group.com/en/news/nxp-i-code-sli-xnow-available-from-idtronic/feed/ 0 http://idtronic-group.com/en/news/idtronic-recommends-its-iso-smartcard-nxp-mifare-1s20-mini/ http://idtronic-group.com/en/news/idtronic-recommends-its-iso-smartcard-nxp-mifare-1s20-mini/#comments Wed, 24 Aug 2011 11:00:41 +0000 IDTronic http://idtronic-group.com/?p=1472 The NXP Mifare 1S20 (mini) is a full fledge ISO14443A Mifare Classic card with all the features and encoding structures but just less memory (320 bytes instead of 1024 bytes) compared to classic Mifare 1 kbytes cards, which leads to a very good price ratio compared to the Mifare 1 kbytes Classic card.

 

This is definitely a valid alternative when quality and competitive pricing are the key decision maker.

 

Please ask us for a sample card and price quotation.

All our iDTRONIC Smartcards can be professional personalized with a wide range of options, such as:

• Offset printing, Silkscreen printing, Metallic printing
• Printing of serial/UID number
• Printing of barcode
• Signature panel transparent/white
• Photo & Name personalization
• Memory chip encoding
• Magstripe and encoding (LoCo, HiCo)
• Hologram and Security Printing
]]> http://idtronic-group.com/en/news/idtronic-recommends-its-iso-smartcard-nxp-mifare-1s20-mini/feed/ 0 http://idtronic-group.com/en/news/idtronic-presents-its-new-rfid-mobile-terminal-somo-650/ http://idtronic-group.com/en/news/idtronic-presents-its-new-rfid-mobile-terminal-somo-650/#comments Wed, 24 Aug 2011 11:00:29 +0000 IDTronic http://idtronic-group.com/?p=1487 iDTRONIC Smart RFID, a leading supplier for RFID readers, Access Control readers and Mobile RFID terminals presents its new SoMo 650 with integrated iDTRONIC RFID readers for LF, HF and UHF frequency.

 

The Mobile Terminal SoMo 650 delivers maximum performance and reliability in a lightweight and ergonomically design for easy handling.

 

Thanks to the integrated iDTRONIC RFID reader the SoMo 650 reaches a very good performance in autonomy, reading distance, flexibility and price. The RFID unit is protected with a special ruggedized protection cap.

 

The following versions are available:

 

Frequency	ISO Standard	Supported Transponders	Order Code
125 kHz	125 kHz	EM4100, EM4105, EM4550, NXP Hitag 1,2, S, Sokymat Q5, Atmel Temic5567	R-HH-SO-EC125
13.56 MHz	ISO 14443 A/B	NXP Mifare + DESFire, ISO 14443 A/B Tags	R-HH-SO-EC14443
13.56.MHz	ISO 15693	NFC I-Code SLI, TI Tag-it HF-I, ISO 15693 Tags	R-HH-SO-EC15693
UHF	ISO 18000-6 B/C	ISO18000-6 B/C incl. EPC Gen2	R-HH-CF-UHF

 

The iDTRONIC Mobile RFID Terminal SoMo 650 suit perfectly for the following applications:

• Access control
• E-purse
• Cashless payment
• Healthcare
• Distribution

 

The SoMo 650 features the high-performance 624 MHz Intel PXA270 processor, a bright coloured, clear and easy to read LCD display, 128 MB SDRAM and 256 MB Flash ROM storage to support robust business applications. The operating systems Windows Mobile 6.0 Classic gives unmatched performance.

 

The SoMo 650 is equipped with a high capacity Lithium ion battery which allows a long operating time. Standard communications are Bluetooth, USB, 802.11b/g WiFi technology. Thanks to a wide range of options/accessories,it is possible to customize the SoMo 650 terminal for your application.

 

Highlights of the iDTRONIC Mobile RFID Terminal SoMo 650

• Dimensions: 127 × 74.6 × 20.6 mm
• Weight: 177 g
• Processor/Memory: Intel PXA 270 – 624 MHz, 256 MB Flash ROM, 128 MB RAM
• Operating system: MS Windows Mobile 6.0
• LCD: 3.5” 240 × 320 Full VGA Transflective TFT with 65 k colours
  Colour LCD Touchscreen with white LED Backlight
• Keyboard: 4 front panel programmable soft buttons,
  5 navigation buttons,
  2 side programmable action buttons,
  Device reset button and Control hold switch
• Battery/Power Supply: Lithium-Ion 3,7V, 1200 mAh rechargeable high-power battery pack
  Input 100-240V AC, 50/60Hz
• Interfaces: 1 × USB, 1 × CF-Card slot, 1 × SD-Card slot,
  1 × 26 Pin Docking Connector for ActivSync,
  Bluetooth,
  WLAN
]]> http://idtronic-group.com/en/news/idtronic-presents-its-new-rfid-mobile-terminal-somo-650/feed/ 0 http://idtronic-group.com/en/news/idtronic-introduces-his-new-uhf-tags-for-industrial-applications/ http://idtronic-group.com/en/news/idtronic-introduces-his-new-uhf-tags-for-industrial-applications/#comments Thu, 18 Aug 2011 11:00:27 +0000 IDTronic http://idtronic-group.com/?p=1513 iDTRONIC introduces his new UHF Tags for industrial applications. The new product range provides transponders with a small form factor for different On-Metal, In-Metal & High-Temperature applications.

 

The transponders, which comes in both a rugged, IP68-cased On Metal version and an embeddable In-Metal version, are perfectly suited for the harshest of environments and can be used in a diverse number of applications such as asset tracking, industrial automation and supply chain management.

 

With up to four meter reading distance and their temperature ranges, the transponders can deliver significant value in the following areas: storing key life-cycle history information of an asset, accessing information in remote locations, and simplifying deployment without the need for complex IT integration.

 

Key features and benefits of the new On-Metal Transponders

• On-metal tags with read range of up to 6 meters
• IP68 rated to handle high application temperatures up to +250 °C
• Large user memory (up to 32 kBytes)
• Available dimensions:
      » OM2:   18 × 11 × 5 mm
      » OM3:   32 × 13 × 5 mm
      » OM4: 100 × 26 × 9 mm



 

Key features and benefits of the new In-Metal Transponders

• In-Metal tags with read range of up to 4 meters
• Ceramic Material to handle embeddable in In-Metal applications
• High application temperatures up to +150 °C
• Large user memory (up to 32 kBytes)
• Available dimensions:
      » IM2: 12 × 7 × 3 mm
      » IM3: 25 × 9 × 3 mm
      » IM4: 30 × 30 × 3 mm



 

Key features and benefits of the new High-Temperature Transponder

• On-metal tags with read range of up to 6 meters
• IP68 rated rated to handle high application temperatures
• +250 °C application temperature for up to 4 hours
• High user memory (up to 32 kBytes)
• Small form factor with 51 × 37 × 8 mm



]]> http://idtronic-group.com/en/news/idtronic-introduces-his-new-uhf-tags-for-industrial-applications/feed/ 0 http://idtronic-group.com/en/news/uhf-long-range-starter-kit/ http://idtronic-group.com/en/news/uhf-long-range-starter-kit/#comments Fri, 12 Aug 2011 13:40:50 +0000 IDTronic http://www.idtronic-group.com/wp/?p=745 iDTRONIC, a leading supplier of RFID Hardware solutions, introduces today its UHF Long Range Gate Starter Kit

 

iDTRONIC’s latest innovative product, the “UHF Long Range Gate SDK“ consists of the high-performance iDTRONIC UHF Long Range Reader/Writer, four circular polarized antennas (A1 type), two stands, full mounting equipment and cables, as well as, a full Starter Development Kit on CD-ROM.

 

The new UHF Reader/Writer Device is a high performance reader (R/W) based on Intel´s latest R1000 transceiver and can be configured with any frequency from 860—960 MHz. This makes it usable in Europe, US and even Japan. It also has also a software programmable RF Power supply (up to 2 W RF) and multi-colour LED indicators.

 

The versatile and robust Long Range Reader is capable of reading tags that conform to EPC Generation Two (Gen2) and ISO 18000-6 B/C standards. It allows reading distances of up to 10 meters and is field-upgradeable for future protocols: easy and fast firmware upgrades are possible via the USB Interface. Thanks to its robust high strength and resilient extruded aluminium enclosure, it can resist temperatures of up to 60 °C.

 

A four channel Multiplexer is integrated in the UHF LR Reader / Writer and thanks to the software control of the antenna outputs, it is possible to use it for many different configurations. The configuration possibilities make it easy to adapt this device to a wide variety of applications, including asset management, baggage handling, container & pallet tracking, item-level inventory management and warehouse logistics.

 

The UHF Reader / Writer is a multi-protocol, multi-regional UHF RFID device. Advanced features include the support of Dense Reader Mode (DRM) and Listen Before Talk. Its Anti-Self Jamming (ASJ) technology allows deployment of several readers simultaneously in a Multi-Reader Environment.

 

iDTRONIC’s UHF long range antenna A1 is a circular polarized high performance device which allows the user to read out the tags in multiple 3D orientations. It covers both European and US RFID bands, is entirely waterproof and very easy to install.

 

The iDTRONIC UHF-Long Range Gate SDK is specially configured for developing UHF Long Range applications. It is a complete solution in hard- and software, including software tools with drivers for Windows and Linux, demo applications and source code. It counts with a full developer support, available at any time and for any question.

 

The SDK includes the full set of hardware necessary to being the development of your specific application in today´s most demanding markets.

 

For more information about this UHF Reader and all other UHF products, e-mail readers@idtronic.de or visit our website: idtronic-rfid.com. You can also contact our North American Distribution Partner BrightCard for more information and prices – www.brightcard.net or (301)637-4528

]]> http://idtronic-group.com/en/news/uhf-long-range-starter-kit/feed/ 0 http://idtronic-group.com/en/news/new-rfid-keyfob-nature/ http://idtronic-group.com/en/news/new-rfid-keyfob-nature/#comments Wed, 10 Aug 2011 11:00:57 +0000 IDTronic http://idtronic-group.com/?p=1468 iDTRONIC Smart Tags, a leading supplier for smartcards and smarttags presents its new RFID based keyfobs,
which suit perfectly for the following applications:
• Access Control & Time Attendance
• Fitness Centres & Gyms, Wellness & Leisure Activities
• Visitor & Event Management

 

iDTRONIC’s modern KEYFOB NATURE combines the RFID Technologie with a complete new customizable
Keyfob. The KEYFOB NATURE gives the possibility of a Hotstamp-Print with customer logo and is available
in color black or brown.

 

Our KEYFOB NATURE has a very nice leather finish, which gives an exclusive and gentle touch to the product
and is available with all common 125 kHz & 13.56 MHz ICs.

 

Personalisation Options

• Hotstamp Print with your customer logo
• Chip encoding
]]> http://idtronic-group.com/en/news/new-rfid-keyfob-nature/feed/ 0 http://idtronic-group.com/en/news/new-rfid-keyfob-basic/ http://idtronic-group.com/en/news/new-rfid-keyfob-basic/#comments Tue, 26 Jul 2011 11:00:49 +0000 IDTronic http://idtronic-group.com/?p=1464 iDTRONIC Smart Tags, a leading supplier for smartcards and smarttags presents its new RFID based keyfobs,
which suit perfectly for the following applications:
• Access Control & Time Attendance
• Fitness Centres & Gyms, Wellness & Leisure Activities
• Visitor & Event management

 

The iDTRONIC RFID KEYFOB BASIC combines the RFID technology with good looking and practical Keyfob housings. The ABS Housing is available in different colours and the Humidity resistance code is IP67. The metallic Key Chain for easily fitting to a normal key ring will be supplied. They are available with the most common ICs in 125 kHz as well as in 13.56 MHz

 

Personalisation Options

• Ink jet printed serial number
• Laser engraved serial number
]]> http://idtronic-group.com/en/news/new-rfid-keyfob-basic/feed/ 0 http://idtronic-group.com/en/news/mini-oem-reader-hf-multitag-with-nxp-7-bytes-uid-nfc-support/ http://idtronic-group.com/en/news/mini-oem-reader-hf-multitag-with-nxp-7-bytes-uid-nfc-support/#comments Tue, 19 Jul 2011 11:00:30 +0000 IDTronic http://idtronic-group.com/?p=1510 iDTRONIC has upgraded his Mini OEM Reader family with the NFC and NXP 7 Byte UID functionality. This Mini OEM HF Reader is a flexible Read/Write device with a separate antenna. The device fully supports all common ISO 14443A, 15693 and NFC technologies. The reading range for the reader is up to 8 cm and you can have a data transfer speed of up to 106 kbits per seconds.

 

The separate antenna allows an easy set up for the most common RFID applications. The 3 available antenna sizes are perfectly designed for built into POS devices, but also can be used for ticketing, payroll systems, time attendance, access control systems and vending machines.

 

Highlights of the Mini OEM Reader HF

• Supported ISO standards:
      » ISO 14443
      » ISO 15693
      » NFC
• RS232, RS485 or TTL
• MS Windows XP & 7 compliant
• Full SDK with demo software

 

Applications

• Ticketing
• Payroll Systems
• Access Control
• Time Attendance
• Vending Machines

 

iDTRONIC’s OEM Readers come with a complete SDK and MS Windows based application Software.

]]> http://idtronic-group.com/en/news/mini-oem-reader-hf-multitag-with-nxp-7-bytes-uid-nfc-support/feed/ 0 http://idtronic-group.com/en/news/new-rfid-keyfob-eco/ http://idtronic-group.com/en/news/new-rfid-keyfob-eco/#comments Wed, 13 Jul 2011 11:00:15 +0000 IDTronic http://idtronic-group.com/?p=1456 iDTRONIC Smart Tags, a leading supplier for smartcards and smarttags presents its new RFID based keyfobs,
which suit perfectly for the following applications:
• Access Control & Time Attendance
• Fitness Centres & Gyms, Wellness & Leisure Activities
• Visitor & Event management

 

The iDTRONIC RFID KEYFOB ECO combines the RFID technology with good looking and practical Keyfob housings. The ABS Housing is available in different colours and the Humidity resistance code is IP67. The metallic Key Chain for easily fitting to a normal key ring will be supplied. They are available with the most common ICs in 125 kHz as well as in 13.56 MHz

 

Personalisation Options

• Ink jet printed serial number
• Laser engraved serial number
]]> http://idtronic-group.com/en/news/new-rfid-keyfob-eco/feed/ 0 http://idtronic-group.com/en/news/new-wristband-flex/ http://idtronic-group.com/en/news/new-wristband-flex/#comments Mon, 11 Jul 2011 11:00:00 +0000 IDTronic http://idtronic-group.com/?p=1452 iDTRONIC, a leading supplier of RFID Hardware products, introduce its new Wristband FLEX. iDTRONIC’s RFID wristbands combine the RFID technology with good looking and practical housings.

 

They can be used like a wrist watch and make using RFID technology easy. Beside their robustness,
the iDTRONIC RFID wristbands do have a sealed electronic unit and are waterproof.

 

The special innovation of the Wristband FLEX is the new soft PVC Housing with PVC Inlay. The imprint is attached under the transparent PVC inlay. Through this the logo is perfect protected for scratch, abrasion and general extraneous cause.

 

The Wristband FLEX is a very high quality and good looking Wristband. It is very nice to wear and a very good choice for Health Clubs and Leisure Areas. The Wristband FLEX gives the possibility of printing with customer design or logo. The printing of a serial number is possible as well.

 

The Wristband FLEX are available in all common LF and HF ICs including Mifare family and LEGIC.

 

Highlights of the iDTRONIC Wristband FLEX

• Practical PVC material housing
• Waterproof
• Available in various colors
• Offset printing and Laser Engraving possible
• Innovative PVC Inlay
• Available with all common LF & HF ICs
]]> http://idtronic-group.com/en/news/new-wristband-flex/feed/ 0 http://idtronic-group.com/en/news/uhf-usb-readwrite-stick/ http://idtronic-group.com/en/news/uhf-usb-readwrite-stick/#comments Fri, 08 Jul 2011 11:00:16 +0000 IDTronic http://www.idtronic-group.com/wp/?p=743 iDTRONIC, a leading supplier for RFID Hardware, introduces the new UHF USB Stick for reading and writing all ISO 18000-6 Part B and C Tags. Its integrated configuration software enables it to operate with all the common UHF frequencies from 840—960 MHz (EPC Gen2), which makes it usable in Europe, US, and Asia.

 

IDTRONIC’s new UHF USB Read / Write Stick is an easy to handle RFID Reader to be used with USB equipped Terminals and Laptops. Its light weight and compact design, in combination with the latest technology and a robust ABS housing, make it the perfectly suited to a very wide range of identification applications.

 

Logistics management, track–and-trace, distribution systems, and inventory control environments all benefit from the high performance of this innovative stick reader. Able to operate at temperatures of up to 60 °C, it can even be used in very rough environments.

 

The linearly polarized built-in antenna allows a maximum reading distance of up to 80 cm. The USB V2.0 type A ensures reliable, high-speed data transfer. The reader supports data rates to the tag of between 40 kbps and 250 kbps, and from the tag to the reader of 40 kbps.

 

The UHF Read/Write USB stick includes a multi-colour LED indicator to easily monitor the reading status. The reader uses the 5 Volt USB power supply, and the power output is adjustable up to 20 dBm. Moreover, the Reader offers a reader sensitivity well over -90 dBm.

 

iDTRONIC’s USB Stick-UHF is packaged with a full SDK and Demo software for Windows.

 

For more information about the new UHF USB from IDTRONIC and all other products, e-mail readers@idtronic.de or visit our website: idtronic-rfid.com.

]]> http://idtronic-group.com/en/news/uhf-usb-readwrite-stick/feed/ 0 http://idtronic-group.com/en/news/compact-flash-uhf-readerwriter/ http://idtronic-group.com/en/news/compact-flash-uhf-readerwriter/#comments Fri, 10 Jun 2011 11:00:45 +0000 IDTronic http://www.idtronic-group.com/wp/?p=741 The new Compact Flash UHF Reader / Writer from iDTRONIC supports the full UHF frequency band from 860—960 MHz. It has been designed and developed to allow Pocket PCs, PDA’s, Handheld Terminals and other mobile devices to access to ISO 18000-6 Part B + C (Gen1-Gen2) UHF smart labels, tags and ISO transponders.

 

iDTRONIC’s new lightweight UHF CF clearly demonstrates how mobile readers are getting more and more compact. With a weight of just 30 grams, and measuring just 95 × 60 × 12 mm in combination with a robust ABS housing, the new reader fits in anywhere.

 

The CF Reader can work with any of the latest Pocket PCs and PDAs with an integrated CF2 Interface and supports Windows CE, Windows Pocket PC and Windows Mobile 5 & 6 operating systems. The reading distance for the CF Reader can be up to 50 cm, depending on the type and size of the used transponder.

 

Efficient power management is ensured by the 3.3 Volt power supply, with power consumption of just 20 mA in Stand-by mode and 250 mA in Active mode. The UHF CF Reader includes a dual colour LED to easily monitor the reading status. The power output is programmable to 20 dBm in 1 dB step size.

 

iDTRONIC´s CF device is packaged with a CD ROM containing full documentation and software for testing and as optional available SDK version with more software and libraries for the development in Windows environment.

 

iDTRONIC’s UHF Compact Flash Reader is suitable for:

• • Logistics
• • Transportation
• • Ticketing
• • Identification
• • Asset Tracking
]]> http://idtronic-group.com/en/news/compact-flash-uhf-readerwriter/feed/ 0 http://idtronic-group.com/en/news/industrial-bluebox-readerwriter/ http://idtronic-group.com/en/news/industrial-bluebox-readerwriter/#comments Fri, 06 May 2011 11:00:17 +0000 IDTronic http://www.idtronic-group.com/wp/?p=728 iDTRONIC presents its new industrial Bluebox Reader / Writers series for LF and HF RFID transponders at EURO ID in Cologne.

 

iDTRONIC’s Bluebox industrial readers / writers are specially designed for industrial environments. They are completely sealed against dust and water. This rugged housing ensures reliable operations in nearly any harsh environment, from the warehouse to the yard and beyond. The robust CE-approved IP65 housing guarantees high functionality and performance under the most tough conditions.

 

The integrated interfaces RS232/RS485, Ethernet or ProfiBus provide a fast and assured data transfer. Firmware upgrades could be easily done by using the remote configuration features of the interfaces.

 

Four digital I/O Ports support practical and flexible applications. All Bluebox Controllers come with easy-to-use Demo SW and a full SDK.

 

The Bluebox Readers are available with internal antenna or with one or two external antennas. The updated product family will also include Mid-Range and Long Range Bluebox Readers for long distance reading.

 

The LF version of the modern “Bluebox” Reader/Writer supports all EM 4100, 4550, NXP Hitag 1/S and Atmel Temic 5567 transponder.

 

The supported transponders for the HF version include ISO 15693, ISO 14443 A/B and components of the MIFARE family.

 

The Bluebox products are supplemented by a wide portfolio of high quality Panel, Sensor and On-Metal antennas. The Bluebox product family is designed for Industrial, Warehouse, Asset tracking, Laundry and Identification applications.

 

For more information about the iDTRONIC Bluebox Reader/Writers and all other Readers, e-mail readers@idtronic.de or visit our website: idtronic-rfid.com

]]> http://idtronic-group.com/en/news/industrial-bluebox-readerwriter/feed/ 0 http://idtronic-group.com/en/news/uhf-gun/ http://idtronic-group.com/en/news/uhf-gun/#comments Fri, 15 Apr 2011 11:00:33 +0000 IDTronic http://www.idtronic-group.com/wp/?p=723 iDTRONIC´s expertise in supplying the most efficient hardware solutions, combined with its knowledge in real world RFID implementations is reflected in its latest offering, the rugged high-performance RFID terminal “UHF Gun”. This durable dust and water resistant device supports what you need to work and enables you to help increasing productivity and efficiency.

 

iDTRONIC’s Mobile RFID Terminal  “UHF Gun“ has been designed to provide Long Range Reading for UHF ISO18000-6 B/C tags and labels. It has an outstanding reading performance with reading distances of up to 2 meters. Thanks to the integrated pistol grip with 4400 mAh battery, the “UHF Gun“ guarantees easy handling and a very high autonomy. Also convenient docking stations make charging and synchronizing easier than ever in both office and vehicle.

 

The ease of use and portability of the “UHF Gun” combine to deliver exceptional ergonomics, ensuring reliable performance wherever and whenever you need it. The compact size and low weight makes it comfortable to use throughout a full-shift. A 3.5” transflective sunlight readable LCD with LED backlight touch screen provides exceptional clarity and contrast and allows easy reading in a variety of lighting conditions.

 

The new RFID Terminal “UHF Gun”, the next generation of portable RFID readers from iDTRONIC, delivers maximum performance and reliability in a lightweight and extremely rugged design. It exceeds military specifications for resistance to drops, dust, vibration and both high and low temperatures. Rated at IP54, the mobile handheld is protected against dirt and water sprayed from all directions and can even withstand multiple 1.5 m drops to polished concrete. These features give users the ability to work in nearly any environment and dramatically reduces repair and downtime costs.

 

The innovative RFID mobile device “UHF Gun” can support intensive working programs, thanks to the integrated 3000 mAh + 4400 mAh high power battery packs. The standard communication is provided with the integrated USB, Bluetooth and WiFi interfaces. Thanks to GSM, GPRS, EDGE options, the communication capability of the “UHF Gun” can be extended further.

 

The “UHF Gun” offers a wide range of options and accessories such as 1D Laser scanner, 2D Barcode imager, 1,3 Megapixel fixed focus camera with flash, GPS Receiver, Powered Cradle for Vehicle mount applications and single or 4 slot cradle. It runs under Windows CE 5.0 & Windows Mobile 6.0 operating systems It is easily upgradeable and gives unmatched performance, maximizing your software development investment. It is available with the high-performance PXA270 520 MHz, PXA320 820 MHz CPU, 128 MB SD RAM and 256 MB Flash.

]]> http://idtronic-group.com/en/news/uhf-gun/feed/ 0 http://idtronic-group.com/en/news/mobile-bluetooth-reader-i-poll-uhf/ http://idtronic-group.com/en/news/mobile-bluetooth-reader-i-poll-uhf/#comments Fri, 11 Mar 2011 11:00:55 +0000 IDTronic http://www.idtronic-group.com/wp/?p=552 iDTRONIC, a leading supplier for RFID Hardware products, has introduced its new Mobile Bluetooth Reader I-Poll UHF for ISO 18000-6 C EPC Glass1 Gen2 tags and labels.

 

iDTRONIC´s Mobile Bluetooth Reader is for professional users, offering a perfect solution for all applications where reliable, robust and well performing RFID products are needed.

 

This Mobile Bluetooth Reader “I-Poll” UHF with integrated antenna is a flexible 860—960 MHz device for reading distances up to 1.5 m.

 

iDTRONIC´s Data Long Range transceiver “I-Poll” is a contactless reader, which provides full mobility for Long Range reading of RFID tags. It has an integrated USB and Bluetooth interface for connecting to PCs or PDAs.

 

Thanks to its excellent anti-collision capabilities, which allow it to read dozens of tags simultaneously, it is particularly well-suited for warehouse & supermarket applications. It can be deployed as a mobile tag ID verifier that sends the Tag’s data in real time to a host. Its advanced antenna design allows long read distances up to 2m. The user interface consists of 2 scan buttons, one buzzer and two coloured LEDs.

 

For more information about the Mobile Bluetooth Reader “I-Poll” and all other iDTRONIC RFID products please e-mail readers@idtronic.de or visit our website www.idtronic-rfid.com

]]> http://idtronic-group.com/en/news/mobile-bluetooth-reader-i-poll-uhf/feed/ 0 http://idtronic-group.com/en/news/new-bluebox-uhf-mid-range-controller/ http://idtronic-group.com/en/news/new-bluebox-uhf-mid-range-controller/#comments Wed, 23 Feb 2011 11:00:43 +0000 IDTronic http://idtronic-group.com/?p=1506 iDTRONIC Professional RFID introduces the new BLUEBOX UHF Mid Range Controller. The BLUEBOX UHF Mid Range Controller is available with internal antenna or with external antenna. Both devices are suitable for UHF 865 – 915 MHz use and suitable for ETSI and FCC operation. The BLUEBOX UHF Mid Range Controller is able to read/write ISO 18000-6 C Tags including EPC Gen2 at a distance of up to 3 meters.

 

The outstanding configuration possibilities of the new BLUEBOX UHF Mid Range Controller make it easy to adapt it to a range of applications like Logistics, Inventory Control and Car Park Access.

 

Highlights of the iDTRONIC UHF Mid Range Controllers

• Supports ISO 18000-6C (incl. C1G2)
• External or integrated antenna available
• Software configurable frequency (865 – 915 MHz)
• RF Operating distance up to 3 meters
• Max. RF power 27 dBm (SW adjustable)
• RS232/RS485, Ethernet or Profibus interface
• 2 digital output (relay)
• 2 digital input with optical insulation
• Easy firmware upgrade and configuration
• CE approved
• IP65

 

Applications

• Logistics
• Production Control
• Car Park Access

iDTRONIC Professional RFID offers a complete range BLUEBOX Controllers, Readers and Antennas for all typical RFID frequencies (UHF, HF, LF). Beside the BLUEBOX product range iDTRONIC Professional RFID offers Mobile Data Terminals with integrated iDTRONIC RFID technology and Special RFID Tags and Transponders for professional use.

]]> http://idtronic-group.com/en/news/new-bluebox-uhf-mid-range-controller/feed/ 0 http://idtronic-group.com/en/news/bluebox-uhf-controller/ http://idtronic-group.com/en/news/bluebox-uhf-controller/#comments Fri, 11 Feb 2011 11:00:03 +0000 IDTronic http://www.idtronic-group.com/wp/?p=603 iDTRONIC, a leading supplier for RFID Hardware products, has introduced its new BLUEBOX UHF Controller with integrated antenna for ISO 18000-6B/C tags and labels.

 

iDTRONIC´s BLUEBOX system is for professional users, offering a perfect solution for all applications where reliable, robust and well performing RFID products are needed.

 

This BLUEBOX UHF Controller with integrated antenna is a flexible 860—960 MHz Read / Write device for reading distances up to 80 cm (with 20 dBm max. power). The built-in Impinj R1000 processor makes it usable in Europe, US and Japan.

 

iDTRONIC´s BLUEBOX UHF Controller will be available with  RS232/RS485, Ethernet or Profibus interface. The CE approved devices have an IP65 protected enclosure, 2 digital inputs & 2 digital outputs with optical insulation which can be easily connected to external indicators / alarms.

 

The BLUEBOX UHF Controller with integrated antenna comes with an advanced SDK and comprehensive demo software.

 

The outstanding configuration possibilities of the BLUEBOX system make it easy to adapt it to a range of applications like logistics management, industrial inventory control and Access Control applications.

 

iDTRONIC´s BLUEBOX RFID System is available for LF, HF and UHF standards. For each frequency the BLUEBOX program offers a wide choice of controllers and antennas. A common communication protocol for all BLUEBOX Controllers allows to the costumers easy working in different frequency standards and applications.

 

For more information about the BLUEBOX RFID System and all other iDTRONIC RFID products please e-mail readers@idtronic.de or visit our website: idtronic-rfid.com

]]> http://idtronic-group.com/en/news/bluebox-uhf-controller/feed/ 0 http://idtronic-group.com/en/news/new-usb-pen-stick-reader-evo-uhf/ http://idtronic-group.com/en/news/new-usb-pen-stick-reader-evo-uhf/#comments Tue, 18 Jan 2011 11:00:11 +0000 IDTronic http://idtronic-group.com/?p=1494 iDTRONIC, a leading supplier for RFID hardware, introduces the new USB Pen Stick Reader EVO UHF for reading and writing all ISO 18000-6C tags (incl. Class1 Gen2). Thanks to its frequency band from 865-928 MHz, the iDTRONIC USB Pen Stick Reader EVO UHF can be used for ETSI and FCC applications.

 

iDTRONIC´s new USB Pen Stick Reader EVO UHF is an easy to handle RFID Read/Write unit to be used with USB equipped Terminals and Netbook / Laptop / Tablet-PC or PC. Its light weight and compact design, in combination with the latest technology and a robust ABS housing, make it the perfectly suited to a very wide range of identification applications like Encoding, Network Access, Access Control or Logistics.

 

The USB Pen Stick Reader EVO UHF has a 20dBm power output. Its linearly polarized built-in antenna allows a maximum reading distance of up to 15 cm (depending on type of transponder). The USB 2.0 ensures reliable, high-speed Data transfer.

 

iDTRONIC´s new USB Pen Stick Reader EVO UHF is a high performing and economic proposal for the fast growing group of customers using UHF technology.

 

Highlights of the USB Pen Stick Reader EVO UHF

• Supported transponders:
  » ISO 18000-6C
  » EPC Class 1 Gen 2 Tags
  » NXP UCODE EPC Class 1 Gen2
  » NXP U-Code G2iL
• Compliant for Europe ETSI and FCC standard USB 2.0 interface
• 20 dBm power output
• full SDK, DLL Description and MS Windows based demo software.
• robust ABS housing
• reading distance of up to 15 cm

 

Applications

• Desktop Readers/Encoders
• Network Access Control
• Access Control
• Logistics

 

Other available Types

• USB Pen Stick Reader EVO–HF Multitag
  supports most common 13,56MHz tags with the following standards:
  » ISO 15693
  » ISO 14443 A/B
  » NXP Mifare family
• USB Stick Reader EVO–LF Multitag
  This LF version of the USB Stick Reader EVO – LF Multitag supports:
  » All common 125kHz Read Only and Read/Write tags
  » EM4100, EM4102, EM5550
  » NXP Hitag1, Hitag 2, Hitag S

 

The iDTRONIC USB Pen Stick EVO UHF comes with full SDK, DLL Description and MS Windows based application SW.

]]> http://idtronic-group.com/en/news/new-usb-pen-stick-reader-evo-uhf/feed/ 0 http://idtronic-group.com/en/exhibitions/security-essen-2012/ http://idtronic-group.com/en/exhibitions/security-essen-2012/#comments Thu, 13 Jan 2011 11:00:30 +0000 IDTronic http://idtronic-group.com/?p=1828 25. to 28. September 2012 in Essen, Germany

 

security essen is celebrating its 20th edition. Like no other fair, it embodies security and fire prevention technology at a top international level. This world fair dominates the market as an innovation engine, a meeting place of experts and a hub for excellent business deals all around the world. In times of social and political turbulence, security is a market of the future with tremendous growth potential. Modern technologies, products and services are in demand like never before. Be there in autumn of 2012 to witness all developments close-up and help to shape them!

 

We‘re looking forward to seeing you!

 

==> go to the website of the exhibition: security-essen.de

]]> http://idtronic-group.com/en/exhibitions/security-essen-2012/feed/ 0 http://idtronic-group.com/en/exhibitions/id-world-2012/ http://idtronic-group.com/en/exhibitions/id-world-2012/#comments Tue, 11 Jan 2011 11:00:55 +0000 IDTronic http://idtronic-group.com/?p=1832 16. to 18. October 2012 in Frankfurt/Main, Germany

 

The ID WORLD International Congress is the most comprehensive showcase on the evolving world of RFID, biometrics and smart card technologies, and is the only international forum that looks at the advanced auto ID industry as a whole, rather than focusing on a specific technology or vertical sector.

 

==> go to the website of the exhibition: idworldonline.com

]]> http://idtronic-group.com/en/exhibitions/id-world-2012/feed/ 0 http://idtronic-group.com/en/news/uhf-indus-tags/ http://idtronic-group.com/en/news/uhf-indus-tags/#comments Fri, 12 Nov 2010 11:00:02 +0000 IDTronic http://www.idtronic-group.com/wp/?p=720 iDTRONIC, a leading supplier for RFID Hardware solutions, has introduced three newly enhanced RFID tags to meet the demands of a wide range of applications. The UHF Indus Tags are all EPC Class 1 Gen 2 compatible and are now equipped with ALIEN’s Higgs 3 ICs.

 

iDTRONIC’s new Indus tags are specially designed for Industrial Applications, since it is extremely resistant to any kind of external damage.

 

The new UHF tags are complete made of Nylon and Epoxy material, which allows the tags to support the physical conditions found in harsh environments, and to resist against abrasion, impact and corrosion. The Indus Tags are designed to easily resist temperatures up to 90 °C, as well as a wide range of agressive chemicals.

 

They also have a protective coating which is particularly resistant to humidity,  and conforms to the IP67 norm as well as DIN 40050 / IEC 60529. This assures a very low level of interference from materials such as metal and liquids.

 

The new generation of Indus Tag are available in three different form factors, as Indus Brig tag (36 × 126 × 13 mm), designed as a high-end general purpose tag for use in supply chain management solutions including pallet and case tracking. For the same usage, but with other dimensions is the new Indus SQ tag (59 × 112 × 7 mm) designed. The smallest member of the new UHF Tags series, the Indus Tiny tag (37 × 60 × 10 mm) is dedicated for all industrial application where size and form factors are important for the daily use.

 

All Indus tags have been tested at a very reliable reading range of up to 5 meters in a variety of harsh industrial environment. The tags are all EPC Class 1 Gen2 conform, support UHF frequencies from 868—916 MHz and are based on ISO 18000-6 standard.

 

The iDTRONIC Indus tags are particularly well-suited to the identification of goods and objects in industrial, logistics and production applications.

 

Also part of the UHF Tag product line are the new UHF ISO Cards with latest ALIEN Higgs 3 IC technology.

 

For more information about the iDTRONIC UHF Indus Tags  and all other Tags & Transponders from iDTRONIC, email tags@idtronic.de or visit our website: idtronic-rfid.com

]]> http://idtronic-group.com/en/news/uhf-indus-tags/feed/ 0 http://idtronic-group.com/en/news/idtronic-extends-his-evo-desktop-reader-family/ http://idtronic-group.com/en/news/idtronic-extends-his-evo-desktop-reader-family/#comments Wed, 10 Nov 2010 11:00:10 +0000 IDTronic http://idtronic-group.com/?p=1499 iDTRONIC has extended his EVO Desktop Reader family with its new RFID Desktop Reader EVO HF PLUS . This new EVO Desktop Reader/Writer combines the unique design of the EVO Desktop reader series with the latest 13.56 MHz technology for supporting MIFARE DESFire EV1 & Smart MX transponders families.

 

The Desktop Reader EVO HF PLUS is a flexible Read/Write device with 1 SAM Socket. The device fully supports MIFARE DESFire EV1 & Smart MX transponder families and all common ISO 14443A transponders. The reading range for the reader is up to 6 cm and you can have a data transfer speed of up to 106 kbits per seconds.

 

The well-designed EVO Desktop Reader allows an easy integration into most common RFID applications. A multi-Color LED frame allows intuitive interaction of the application with the reader/writer. It can be easily integrated with POS devices, but also can be used for ticketing, payroll systems, time attendance, and access control systems.

 

Highlights of the iDTRONIC Desktop Reader EVO HF Plus

• Supports ISO 14443 A
• Supported transponders
  » T=CL support for ISO14443-4
  » T=CL emulation for MIFARE Classic PICCs e.g.
  » NXP Mifare Ultralight, S20, S50, S70
  » NXP Mifare Ultralight C
  » NXP DESFire D40, D21, D41, D81
  » NXP Smart MX
  » Infineon SLE66CL160S, SLE66CL320P
• 1 SAM Slot
• USB 2.0/PCSC Compliant
• MS Windows XP & 7 compliant
• 1.5 m USB Cable
• Multi colour LED illuminated frame
• Full SDK with demo software
• CE approved housing

 

Applications

• Ticketing
• Payroll Systems
• Access Control
• Time Attendance

 

Other available Types



• USB Desktop Reader/Writer EVO-LF
  supports all EM 4102, 4105, 4550, NXP Hitag 1/2/S FDXB transponders.
• USB Desktop Reader/Writer EVO-HF
  reads and writes all ISO 14443 & ISO 15693 transponders including the Mifare family & NXP I-code.

 



• USB Stick Reader/Writer EVO LF
  supports all EM 4102, 4105, 4550 and NXP Hitag 1/2/S FDXB transponders.
• USB Stick Reader/Writer EVO LF
  reads and writes all ISO 14443 & ISO 15693 transponders including the Mifare family & NXP I-code.
• USB Stick Reader/Writer EVO UHF
  reads and writes all ISO 18000-6 Part B/C Tags. Its integrated configuration software enables it to operate with all the common UHF frequencies from 840 – 960 MHz (EPC Gen2), which makes it usable in Europe, USA and Asia.

 

iDTRONIC’s USB Stick & Desktop Readers EVO are full Read/Write devices which come with a complete SDK and MS Windows based application Software.

]]> http://idtronic-group.com/en/news/idtronic-extends-his-evo-desktop-reader-family/feed/ 0 http://idtronic-group.com/en/applications/waste-management/ http://idtronic-group.com/en/applications/waste-management/#comments Sat, 02 Jan 2010 11:00:58 +0000 admin http://idtronic.donner-doria.de/?p=110 With costs rising in the waste management process, RFID is enabling cities and municipalities to reliably identify individual receptacles and can create incentive-based recycling programs that accurately reward customers for the amount they recycle, while minimizing the overall amount of trash.

 

By automating the collection of all waste, RFID can assure that individual bins have been collected, providing verification of service. In addition this information can be used to optimize truck usage and routes. Processes can be streamlined and more accurate.

 

RFID technology helps a lot to increase efficiency of the waste management operations. To realize this application, a properly designed rugged RFID tag is attached to the waste bins. It contains all user/owner information.

 

An RFID reader/antenna embedded into the truck captures the tag IDs of each waste bin. The data collected from the RFID tags can be linked with a time stamp, type of container, weight of the container, and customer information. The data can be either sent to a host computer using wireless protocols or the data can also be stored in the truck’s onboard computer and later transferred to a central waste management system for data processing.

 

The iDTRONIC Group offers specially designed RFID products for the Waste Management application.

 

iDTRONIC Professional RFID

• BLUEBOX Professional RFID System
• iDTRONIC Special Tags and Labels
]]> http://idtronic-group.com/en/applications/waste-management/feed/ 0 http://idtronic-group.com/en/applications/access-control/ http://idtronic-group.com/en/applications/access-control/#comments Sat, 02 Jan 2010 11:00:55 +0000 admin http://idtronic.donner-doria.de/?p=125 Access Control is a system which enables an authority to control access to areas in a given physical facilities.An access control point, which can be a door, turnstile, parking gate, elevator or other physical barrier where granting access can be controlled using RFID technology.

 

Data security is generally very high using RFID technology. It also reduces the possibility of duplicating credentials. Secure or proprietary communication protocols can also be used to further enhance security.

 

A RFID based Access Control reader does not usually make an access decision but send a card number to an Access Control panel that verifies the number against an access list. Generally only entry is controlled and exit is uncontrolled. In cases where exit is also controlled a second reader is used on the opposite side of the door.

 

The typical RFID tag is a RFID based contactless smartcard, key fob, wristband or smartphone sticker.

 

RFID based Access Control Systems are typically used for Enterprise Access, Car Park Access, Access to Gyms or

Swimming Areas, Event Access, Library Access or Access to Hotel Rooms.

 

The iDTRONIC Group offers an extensive range of Access Control products to cover these applications.

iDTRONIC Smart RFID

 

• Eazy Axxess System

 

iDTRONIC Smart Tags




• RFID Smartcards

 

• RFID Keyfobs

 

• RFID Wristbands

 

• RFID Tickets

 

iDTRONIC Professional RFID




• BLUEBOX UHF Mid Range Controller (for Carpark Access)
]]> http://idtronic-group.com/en/applications/access-control/feed/ 0 http://idtronic-group.com/en/applications/industrial-automation/ http://idtronic-group.com/en/applications/industrial-automation/#comments Sat, 02 Jan 2010 11:00:41 +0000 admin http://idtronic.donner-doria.de/?p=115

For optimizing production processes the system needs to control itself through autonomous information exchange with individual products and product carriers. Thanks to RFID technology it is possible to fully automate production processes and to organize the data the best possible sequence directly at the process point and to make sure products find their way alone.

 

iDTRONIC offers innovative RFID hardware solutions for a broad range of applications within the area of industrial and process automation.

 

IDTRONIC RFID Controllers, Readers, Antennas as well as all connectivity products such as passive junctions, connectors and fieldbus cables are all modular and available for all kind of requirements.

 

iDTRONIC Special RFID tags have been designed also to be used in any industrial environment. For example RFID tags that can withstand not only high temperature, but also can withstand for example a constant heating and cooling cycle without loosing the data in the RFID tag.

 

The iDTRONIC Group offers a range of modular RFID products for the Industrial Automation.

 

iDTRONIC Professional RFID




• BLUEBOX Professional RFID System

 

• iDTRONIC Special Tags and Labels
]]> http://idtronic-group.com/en/applications/industrial-automation/feed/ 0 http://idtronic-group.com/en/applications/laundry/ http://idtronic-group.com/en/applications/laundry/#comments Sat, 02 Jan 2010 11:00:28 +0000 admin http://idtronic.donner-doria.de/?p=107 Today, textile identification and sorting in industrial laundry processes can be greatly enhanced through RFID technology. By attaching tiny RFID tags to garments, uniforms, linens or mats the ownership of the items is well defined.

 

Textiles can be easily identified by the use of RFID technology,with amazing advantages for industrial laundries. Benefits include faster garment identification, automatic sorting, error-free processing, reduced manual labor and long lasting solutions. The amortization factor of RFID systems in industrial laundry applications is very high.

 

It all begins with an RFID tag attached to a garment or linen.  The industry has created a series of ISO standards-based, high-frequency 13.56 MHz tags that are encapsulated in plastic to withstand the harsh temperatures and detergents found in commercial laundries. Tags are programmed with a unique ID number that can be read and processed. RFID tagged garments can be read while stored in bags or racked on hanger bundles.

 

iDTRONIC Group offers fast and accurate RFID hardware products for the textile identification market.

 

iDTRONIC Professional RFID




• BLUEBOX Professional RFID System

 

• iDTRONIC Special Tags and Labels
]]> http://idtronic-group.com/en/applications/laundry/feed/ 0 http://idtronic-group.com/en/applications/retail/ http://idtronic-group.com/en/applications/retail/#comments Sat, 02 Jan 2010 11:00:25 +0000 admin http://idtronic.donner-doria.de/?p=1 Retailers face the constant demand to have the right goods available at the right places in the right quantities. Using RFID technology is the right solution to achieve this.

 

RFID offers benefits from the manufacturing facility all the way through to the point of sale. Immediate benefits of utilizing RFID tags for retail include inventory accuracy, decrease in inventory count time, reduced man hours required for restocking, improved customer service with increased man hours available for customer interaction, increased in-stock position and shelf level accuracy and more efficient back room replenishment.

 

RFID allows retailers to complement existing systems while gathering more information throughout the whole application. Systems with the power to update the information that moves with an individual product provide complete visibility.

 

RFID also can act like a security guard at a gateway. As goods are moved from dock to truck to store, RFID can conduct automatic inventories and compare the goods with the manifest. Goods flow becomes more complete, stock outs are reduced, overages are curtailed and accounting discrepancies are removed.

 

RFID tagged products also ensure perfect brand authentication.

 

The iDTRONIC Group offers a range of RFID products designed for Retail application.

 

iDTRONIC Professional RFID




• BLUEBOX UHF Controllers and Antennas

 

• Mobile Terminals with iDTRONIC RFID inside

 

• iDTRONIC Special Tags and Labels
]]> http://idtronic-group.com/en/applications/retail/feed/ 1 http://idtronic-group.com/en/applications/asset-tracking/ http://idtronic-group.com/en/applications/asset-tracking/#comments Sat, 02 Jan 2010 11:00:23 +0000 admin http://idtronic.donner-doria.de/?p=122 RFID-based Asset Management allows you to optimize inventory management as well as service and maintenance functions. Information is available with the asset and helps to control and optimize a process chain.

 

User can instantly determine the general location of tagged assets anywhere within a facility with the help of RFID technology.  Control point detection zones at strategic locations throughout the facility allow the user to define and monitor logical zones.

 

Using RFID-based Asset Management systems make sure that basic information and continuous traceability is made available at each moment.  RFID technology creates transparency to ensure continuous optimization in compliance with legal regulations and standards.

 

Asset tracking applications will see a strong growth curve in the coming years.

 

The iDTRONIC Group offers a range of RFID products for mobile and stationary Asset Tracking applications.

 

iDTRONIC Professional RFID

 

• BLUEBOX UHF Controllers and Antennas

 

• Mobile Terminals with iDTRONIC RFID inside

 

• iDTRONIC Special Tags and Labels
]]> http://idtronic-group.com/en/applications/asset-tracking/feed/ 0 http://idtronic-group.com/en/applications/event-management/ http://idtronic-group.com/en/applications/event-management/#comments Sat, 02 Jan 2010 11:00:15 +0000 admin http://idtronic.donner-doria.de/?p=58 RFID Technology is already used for events such as exhibitions and conferences to record the participants as well as for big public events as in sport stadiums and all other public events so as concerts, shows etc.

 

RFID enabled tags or tickets help to automate the Registration and Check-in process. RFID Technology makes the Check-in process much faster and more convenient for the customers. Specially in Ski resorts RFID enabled tickets allow the hands free access to ski lifts.

 

Using RFID technology in Event Management applications support also marketing offerings, enhance attendee analysis, and add value to lead generation and sales activities. RFID enabled tickets can help also to solve the problems of counterfeit tickets in event ticketing.

 

Beyond the time and cost savings achieved, this application highlights efficiency of using RFID technology to a broad group of users.

 

iDTRONIC Smart RFID




• EAZY AXXESS System

 

iDTRONIC Smart Tags




• RFID Smartcards

 

• RFID Wristbands

 

• RFID Tickets

 

iDTRONIC Professional RFID




• Mobile Terminals with iDTRONIC RFID inside
]]> http://idtronic-group.com/en/applications/event-management/feed/ 0 http://idtronic-group.com/en/applications/supply-chain/ http://idtronic-group.com/en/applications/supply-chain/#comments Sat, 02 Jan 2010 11:00:08 +0000 admin http://idtronic.donner-doria.de/?p=118 Using RFID technology in Supply Chain applications optimizes visibility, security, and efficiency across every industrial sector. Tagging cases and pallets with RFID tags or labels helps dramatically to improve warehouse management while reducing out-of-stocks and improving sales.

 

RFID technology creates transparency to ensure continuous optimization of the manufacturing processes, compliance with legal regulations and standards as well as achieving maximum quality for the end consumer.

 

Almost any enterprise can use RFID technology to automate Supply Chain Management and Transportation Management functions such as proof of delivery, automated replenishment, and inventory tracking. RFID data can be easily incorporated into back-end enterprise planning (ERP) systems and exchanged between trading partners as a component of their EDI messages.

 

The RFID-enabled Supply Chain provide detailed information about the status and position of the goods, thus reducing costs and speeding up consumer protection.

 

The iDTRONIC Group offers interesting RFID hardware products designed for Supply Chain applications.

 

iDTRONIC Professional RFID




• BLUEBOX UHF Controllers and Antennas

 

• Mobile Terminals with iDTRONIC RFID inside

 

• iDTRONIC Special Tags and Labels

?

]]> http://idtronic-group.com/en/applications/supply-chain/feed/ 0 http://idtronic-group.com/en/applications/library/ http://idtronic-group.com/en/applications/library/#comments Sat, 02 Jan 2010 11:00:06 +0000 admin http://idtronic.donner-doria.de/?p=99 RFID is the latest technology to be used in libraries. Unlike the old fashioned EM (Electro-Mechanical) and RF (Radio Frequency) systems, which have been used in libraries for decades, RFID based systems provide more security and efficient for the tracking of materials throughout the library, including easier and faster Check-in and Check-out, inventorying, and materials handling.

 

Thanks to the RFID technology all material can be handled without exception. Even Videos and DVDs can be tagged and identified. The RFID technology provides an almost 100 percent detection rate. There is no false alarm once an RFID system is properly tuned.

 

The main advantages of using RFID technology in libraries are:

 

• High-speed inventory including identify items which are out of proper order. RFID technology provides the possibility to scan books on the shelves without removing them just by using a proper handheld inventory reader.

 

• Rapid Check-in / Check-Out with fast stack reading.and automatic book drops.

 

• Theft detection hanks to the Long Range reading capabilities of the RFID equipment with extra-wide exit gates. The corridors at the building exits can be up to 1 meter wide.

 

• Long tag life and high reliability.

 

The iDTRONIC Group offers a range of products designed for RFID based library systems.

 

iDTRONIC Professional RFID




• BLUEBOX Professional RFID System

 

• Mobile Terminals with iDTRONIC RFID inside

 

• iDTRONIC Special Tags and Labels
]]> http://idtronic-group.com/en/applications/library/feed/ 0 http://idtronic-group.com/en/startapps/smart-tags/ http://idtronic-group.com/en/startapps/smart-tags/#comments Fri, 01 Jan 2010 11:00:57 +0000 admin http://www.idtronic-group.com/wp/?p=340 http://idtronic-group.com/en/startapps/smart-tags/feed/ 0 http://idtronic-group.com/en/startapps/smart-rfid/ http://idtronic-group.com/en/startapps/smart-rfid/#comments Fri, 01 Jan 2010 11:00:34 +0000 admin http://www.idtronic-group.com/wp/?p=338 http://idtronic-group.com/en/startapps/smart-rfid/feed/ 0 http://idtronic-group.com/en/startapps/rfid-professional/ http://idtronic-group.com/en/startapps/rfid-professional/#comments Fri, 01 Jan 2010 11:00:13 +0000 admin http://www.idtronic-group.com/wp/?p=335 http://idtronic-group.com/en/startapps/rfid-professional/feed/ 0